Triumph Tiger 800 Owner's Handbook Manual page 103

See the Specification section for details of
approved tyre and inner tube combinations.
Always have tyres and inner tubes fitted and
balanced by your authorised Triumph dealer
who has the necessary training and skills to
ensure safe, effective fitment.
Tyre Pressure Monitoring System
(Only on models fitted with TPMS)
Caution
An adhesive label is fitted to the wheel rim
to indicate the position of the tyre pressure
sensor. Care must be taken when replacing
the tyres to prevent any damage to the tyre
pressure sensors. Always have your tyres
fitted by your authorised Triumph dealer
and inform them that tyre pressure sensors
are fitted to the wheels.
Caution
Do not use anti puncture fluid or any other
item likely to obstruct air flow to the TPMS
sensor's orifices. Any blockage to the air
pressure orifice of the TPMS sensor during
operation will cause the sensor to become
blocked, causing irreparable damage to the
TPMS sensor assembly. Damage caused
by the use of anti puncture fluid or
incorrect maintenance is not considered a
manufacturing defect and will not be
covered under warranty. Always have your
tyres fitted by your authorised Triumph
dealer and inform them that tyre pressure
sensors are fitted to the wheels.
Maintenance and Adjustment
Warning
If a tyre or inner tube sustains a puncture,
the tyre and inner tube must be replaced.
Failure to replace a punctured tyre and
inner tube, or operation with a repaired
tyre or inner tube can lead to instability,
loss of motorcycle control or an accident.
Warning
If tyre or inner tube damage is suspected,
such as after striking the kerb, ask your
authorised Triumph dealer to inspect the
tyre both internally and externally and to
also inspect the inner tube. Remember,
tyre damage may not always be visible
from the outside. Operation of the
motorcycle with damaged tyres could lead
to loss of control and an accident.
103