Lan Features (Kx-Mb2000/Kx-Mb2010/Kx-Mb2030 Only) - Panasonic KX-MB2000HX Operating Instructions Manual

8.7 LAN features (KX-MB2000/KX-MB2010/KX-MB2030 only)

Feature/Code
LAN setting with a DHCP
server
MBNM5NM0NM0N
Setting the IP address for the
LAN connection
MBNM5NM0NM1N
Setting the Subnet mask for
the LAN connection
MBNM5NM0NM2N
Setting the default gateway
for the LAN connection
MBNM5NM0NM3N
Setting the primary DNS
server for the LAN
connection
MBNM5NM0NM4N
Setting the secondary DNS
server for the LAN
connection
MBNM5NM0NM5N
Setting the machine name
MBNM5NM0NM7N
Displaying the MAC address
of the unit
MBNM5NM0NM8N
Selection
M0N "DISABLED": Deactivates this feature.
M1N "ENABLED" (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM0NM1N A MSetN
2. Enter the IP address of the unit on the LAN using the dial keypad. A
MSetN A MMenuN
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM0NM2N A MSetN
2. Enter the subnet mask of the network on the LAN using the dial keypad.
A MSetN A MMenuN
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM0NM3N A MSetN
2. Enter the default gateway of the network on the LAN using the dial keypad.
A MSetN A MMenuN
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM0NM4N A MSetN
2. Enter the primary DNS server of the network on the LAN using the dial
keypad. A MSetN A MMenuN
This feature is available when feature #500 is deactivated.
1. MMenuN A MBNM5NM0NM5N A MSetN
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. A MSetN A MMenuN
1. MMenuN A MBNM5NM0NM7N A MSetN
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 75 for character entry).
R The following symbols can also be entered.
! @ # $ % ^ & ' ) ( . – _ { }
3. MSetN A MMenuN
Note:
R In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
1. MMenuN A MBNM5NM0NM8N A MSetN
2. The MAC address of the unit will be displayed. A MMenuN
8. Programmable Features
71