Receiving Faxes
TEL/FAX
mode!
(receiving voice calls with rings and fax calls without rings
when you are near the unit)
Use this mode when you are always near the unit, are not using an answering machine, and want the fax
machine to detect faxes without ringing. When a call is received, the unit will work as follows. If you have an
extension telephone connected to the same line, see the next page.
The unit will not ring.*
TEL/FAX delayed
ring count
A call is
received.
*** A telephone fee will be charged to the caller from this point.
*** A fax calling tone is automatically generated by the sending fax machine. Some fax machines do not have
this capability.
*** While ringing, the unit will emit a different ring back tone to the calling party.
Note:
≥The unit will display the following when a call is received.
Display:
INCOMING CALL
≥Some fax messages that are transmitted manually may not send a fax calling tone. These calls must be
received manually.
≥The ringer should be on (p. 29).
72
Voice call
Fax calling tone**
The unit will ring up to
3 times.***
Silent fax recognition
ring count
The unit will automatically
activate the fax function for
fax machines that do not
send a fax calling tone.
The unit will
automatically receive
document without
ringing.
Answer the call.
OR