Pager Call - When Your Unit Receives A Fax - Panasonic KX-FM106 Operating Instructions Manual

Receiving Faxes
Pager call - when your unit receives a
This feature allows your unit to call your pager when your unit receives a fax document.
Press (MENU).
1
Display:
Press (#), then (7) (0).
2
Press (START/SET/COPY).
3
4 Press or to select "ON".
≥If this feature is not required, select "OFF".
Press (START/SET/COPY).
5
6 Enter your pager number.
≥You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
Your pager
number
Your pager access
code, if required.
How your unit and pager work
When your unit receives
a fax document, it will call
your pager company.
80
1.SYSTEM SET UP
FAX PAGER CALL
MODE=OFF
MODE=ON
NO.=
Pauses
Message you want displayed
on your pager when your
unit receives a fax.
Pager
company
Your pager
company will
call your pager.
Press (START/SET/COPY).
17
≥The unit will dial the stored number.
18 Confirm if the message is displayed on
your pager.
Press (MONITOR).
19
10 If the AUTO ANSWER light is off, turn it on
by pressing (AUTO\ANSWER).
/
1 2 3
4 5 6
7 8 9
0
REDIAL/PAUSE
(Pause)
MONITOR
Pager
A few minutes later, your pager will display the same
message you entered in step 6 above.
(For example: 5555)
If you have subscribed to a Caller IDservice and the
Caller ID information (telephone number) is received,
your pager will display the telephone number.
fax!
PAGER TEST
AUTO ANSWER
FAX ON
MENU
ON
START/SET/COPY