Reports - Panasonic KX-FM106 Operating Instructions Manual

Error Messages Operations

Reports!

If your unit cannot send a fax, check the following.
–The number you dialed is correct.
–The other party's machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the sending and journal
reports (p. 54, 55).
Communication message
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT RESPOND
PC FAIL OR BUSY
PRESSED THE STOP KEY
THE COVER WAS OPENED
OK
100
For Fax Advantage Assistance, Call 1-800-435-7329.
Error
code
41–72 ≥A transmission or reception error occurred. Try again or check
FF with the other party.
— ≥The document is jammed. Remove the jammed document
(p. 114).
54, 59 ≥A transmission or reception error occurred because of a problem
70 with the other party's fax machine. Check with the other party.
— ≥The document was not received due to memory being full.
— ≥The document was not fed into the unit properly. Reinsert the
document and try again.
— ≥The other party's fax machine was busy or ran out of recording
paper. Try again.
≥The document was not fed properly. Reinsert the document and
try again.
≥The other party's fax machine rings too many times. To send a
fax manually, dial the number, confirm the fax tone, and press
(START/SET/COPY).
≥The other party's machine is not a facsimile. Check with the other
party.
≥The number you dialed is not in service.
— ≥The fax function cannot be operated by the PC. The RS232C
cable is not connected correctly, or the software is not running on
the PC.
≥The (STOP) button was pressed and fax communication was
—
canceled.
— ≥The cover was opened. Close it and try again.
— ≥Fax communication was successful.
Cause & Remedy