Receive Mode - Panasonic KX-FL501 Operating Instructions Manual

Fax – receiving (cont.)
Problem
The printing quality is poor.

Receive mode

Problem
I cannot select the desired
receive mode.
The other party complains that
they cannot send a document.
Copying
Problem
The unit does not make a copy.
A black line, a white line or a
dirty pattern appears on the
copied document.
The printing quality is poor.
Original
A BC
The other party sent a faint document. Ask them to send a
clearer copy of the document.
Some paper has instructions recommending which side to
print on. Try turning the paper over.
You may have used paper with a cotton and/or fiber content
that is over 20%, such as letterhead or resume paper.
The remaining toner is low. Replace the toner cartridge (p. 68).
We recommend you replace the drum unit every third time
you replace the toner cartridge (p. 68). To check the drum
life and quality, please print the printer test list (p. 76).
The toner save mode of feature #79 is on (p. 59).
If you want to set FAX ONLY or TEL/FAX
mode:
—select the desired mode using feature
#77 (p. 59), and
—press
the AUTO ANSWER light.
If you want to set TEL mode:
—press
the AUTO ANSWER light.
The unit is not in AUTO ANSWER mode.
Press
AUTO ANSWER light.
You cannot make a copy during programming. Make the
copy after programming or stop programming.
The glass or rollers are dirty. Clean them (p. 74).
Some paper has instructions recommending which side to
print on. Try turning the paper over.
Copy
You may have used paper with a cotton and/or fiber
content that is over 20%, such as letterhead or resume
paper.
The remaining toner is low. Replace the toner cartridge
(p. 68).
We recommend you replace the drum unit every third time
you replace the toner cartridge (p. 68). To check the drum
life and quality, please print the printer test list (p. 76).
The toner save mode of feature #79 is on (p. 59).
For fax advantage assistance, call 1-800-435-7329.
Cause & solution
Cause & solution
AUTO ANSWER to turn on
AUTO ANSWER
to turn off
AUTO ANSWER
to turn on the
Cause & solution
Operations
ON
OFF
ON
65