Edimax BR-6228NC Setup Manual page 8

5.
Select "Wireless" from the
submenu.
Select "Wireless Settings".
The ESSID will be the network
name of your Wireless network.
Enter a name in "ESSID". Click
"Apply" and then "CONTINUE".
7.
Select "Security Settings" and
choose an "Encryption" type
from the drop down menu.
"WPA pre-shared key" is
recommended.
For "WPA Unicast Cipher Suite",
"WPA2(AES)" is recommended.
Enter a "Pre-shared key" – which will be the wireless security password to
access your wireless network. Your password should be at least eight
characters in length. Click "Apply"
9.
Exit the web based configuration interface and you can now open a new web
browser to access the internet.
6.
Click "CONTINIUE"
8.
After configuring "Security Settings" for
the "5GHz" network, click "APPLY"
instead of "CONTINUE". The system will
restart and save the changes. Click "OK"
when it has finished.
7