Section B: Setting Up the router via Web Browser
For Mac/Linux users – or those who can't run the CD, you can setup the router
manually using the web based configuration interface.
1.
Enter http://192.168.2.1 into the URL of a web browser and enter the
username admin and password 1234.
3.
Select "General Setup" from the top
menu and "WAN" from the submenu.
Choose your connection type – for most
users it is "Dynamic IP". If you are
unsure, please contact your Internet
Service Provider (ISP).
If your computer had been physically
attached to your Cable modem, you can
click "Clone" to clone your computer's
MAC address.
Click "Apply.
2.
Enter the username admin and
password 1234.
4.
6
Click "CONTINIUE"