Restoring Factory Settings; Mounting - GoPro HERO 5 SESSION User Manual

RESETTING YOUR CAMERA

RESTORING FACTORY SETTINGS

Follow the steps below to reset all settings and the camera's password.
This option is useful if you are reselling your camera and want to remove all
customization.
1. With your camera off, press the Menu button to turn on the status
screen.
2. Press the Menu button repeatedly until you get to Exit Menu.
3. Press and hold Shutter button [
4. Press the Menu button to move to Yes, then press the Shutter button
to select it.
62
] for 8 seconds.
MOUNTING YOUR CAMERA
ATTACHING YOUR CAMERA TO MOUNTS
To attach your HERO5 Session camera to a mount, you need a frame
and a mounting buckle and/or thumb screw, depending on the mount
you are using.
THE FRAME
Your HERO5 Session comes with a Standard Frame.
™
Note: To prevent the frame from marking the surface of your camera, leave the latch
on the frame open when storing your camera in a frame for a long period of time.
The HERO5 Session camera is waterproof to 33' (10m) with the door
closed—no additional housing is needed when using the camera in or
around water.
NOTICE: The Standard Frame does not provide additional waterproof
protection for your camera.
63