Headlamps - Chevrolet 2006 Avalanche Owner's Manual

Headlamps

Vehicles with Body-Side Cladding
To replace a headlamp bulb, do the following:
1. Open the hood. See Hood Release on page 5-12
for more information.
3. Pull the inboard side of the assembly out from the
vehicle.
2. Remove the turn
signal/parking lamp
assembly by pressing
the release clip on
the outboard side of the
assembly and pulling
the outboard end
toward you.
4. Pull the pins away from their clips and pull them up
until they completely release from the vehicle.
5. Pull the headlamp assembly out of the vehicle.
5-55