Settings For Inbound Routing - Panasonic DP-4530 Operating Instructions Manual

Settings for Inbound Routing

To use the Inbound Routing feature, program the following parameters to meet the type of routing in
Function Parameters (Fax/Email Settings > Fax Parameters):
Routing type
Routing by sub-
addressing
Routing by the numeric ID
of a sending fax station
To set the From field
To program printout of
received documents
For more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
140
Explanation
Set this parameter to perform an ITU-T sub-address
query within its auto dialler, and to route the received
document(s) to corresponding stations Email
address(s) or telephone number(s).
Set this parameter to perform a numeric ID (TSI frame
information) query within its auto dialler, and to route
the received document(s) to the corresponding
stations Email address(s) or telephone number(s).
Use this parameter to select the type of Email header
to be included in the "From" field of each routed faxes.
Originator (Origi):
The originating fax machine's TSI will appear in the
"From" field of the routed Email.
Relay Station (Rly Stn):
The routing station's Email address will appear in the
"From" field of the routed Email.
Select whether to print all documents received on this
machine ("Always"), or print them only if inbound
routing fails ("Inc Only").
Function Parameters
Set "152 Sub-Addr
Routing" to "Valid".
Set "153 TSI Routing" to
"Valid".
Program "154 Route
Header FMT".
Program "155 Print
Routed Doc".