Setting From Field - Panasonic DP-4530 Operating Instructions Manual

Setting From Field

The From field preset in the machine can be changed by selecting "From" on the Email screen. To set
the From field, follow the steps below.
If "145 Sender Selection" is set to "Valid", you can preset up to 25 sender names. You can select from the
sender list when sending an Email. However, if you select "From" on the Email screen, the sender list will not
be displayed.
For more details on this setting, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) of provided CD-ROM.
1
On the Email screen, select "From".
(See pages 111 and 120)
2
Enter a sender name, or select a
sender Email address, and then select
"Close".
3
Press the Start key.
The original(s) are stored into memory with a
file number. Then the Email transmission
starts.
When "145 Sender Selection" is set to
"Valid", and if you do not select "From", the
Sender Selection list will be displayed after
pressing the Start key. Select a Sender, and
then select "OK".
122