Adjusting The Sound - JVC KD-DV7302 Instructions Manual

Storing your own sound
adjustments
1
2
3
Enter the sound adjustment mode.
4
Select a frequency to adjust.
5
Adjust the level.
6
Repeat steps 4 and 5 to adjust the other
frequency bands.
7
Store the adjustments in the respective
mode.
42

Adjusting the sound

1
2
Adjust the level.
FAD *
1 (fader)
Adjust the front and rear speaker
balance.
BAL (balance)
Adjust the left and right speaker
balance.
LOUD (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
SUB.W *
2 (subwoofer)
Adjust subwoofer output balance.
VOL.A *
3 (volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
VOL (volume)
Adjust the volume.
* If you are using a two-speaker system, set the fader
1
level to "00."
*
2 This takes effect only when a subwoofer is connected.
*
3 You cannot make an adjustment for FM. "FIX"
appears.
* Depending on the amplifier gain control setting. (See
4
page 45 for details.)
R06 to F06
L06 to R06
LOUD ON or
LOUD OFF
00 to 08;
initial: 04
–05 to +05;
initial: 00
00 to 30
(or 50) *
4