Panasonic S24GPWR Operation Manual page 5

●Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
●Unplug the power cord if the Status/ECO LED (Status/ECO mode),
blinks in orange (system fault).
Deviation, such as keeping connected for a long time, could lead to
fire.
●Handle the Switching Hub carefully so that fingers or hands may not be
damaged by twisted pair port, console port, or power cord hook block.
●To connect a power receiving equipment supporting IEEE802.3af to
this Switching Hub, use a cable rated Cat5e or higher.
Using other cables may result in heat generation, ignition, and/or
equipment failure.
Important Notice for Measures against Failures
● When connecting devices (especially outdoor devices) prone to lightning
strikes, such as network cameras or wireless access points, to a twisted pair
port of this Switching Hub, overcurrent and/or overvoltage caused by light-
ning may affect this Switching Hub through a twisted pair cable, causing
equipment failure. When connecting such devices, we strongly recommend
installing a lightning arrester (SPD; Surge Protective Device) at the twisted
pair port side of the Switching Hub.
● Overcurrent and/or overvoltage caused by lightning may affect this
Switching Hub through a power source connected to the power port and/or
a grounding line, causing equipment failure. When there is a possibility of
overcurrent/overvoltage from lightning affecting this Switching Hub from a
power source and/or a grounding line, we strongly recommend installing a
lightning arrester (SPD; Surge Protective Device) at the power port side of
the Switching Hub.
● In case this Switching Hub fails due to lightning strikes, repair charges will
apply even during the warranty period.
Caused by Lightning Strikes
5