Gigaset S675IP User Manual page 98

The following fields are displayed when
you select
IP address type
IP address
Enter an IP address for your phone. This
IP address allows your phone to be
reached by other subscribers in your
local network (e.g. PC).
192.168.2.2 has been preset.
Please note the following:
– The IP address must be from the
address block for private use that is
used in the router. This is generally
in the range 192.168.0.1 –
192.168.255.254 with
255.255.255.0. The subnet mask
determines that the first three parts
of the IP address must be identical
for all subscribers in your LAN.
– The static IP address must not
belong to the address block (IP pool
range) that is reserved for the DHCP
server of the router. It must also not
be used by another device on the
router.
If necessary, check the settings on the
router.
Subnet mask
Enter the subnet mask for your device's
IP address. For addresses from the
address block 192.168.0.1 –
192.168.255.254, the subnet mask
255.255.255.0 is generally used. This
is preconfigured when the phone is
supplied.
Default gateway
Enter the IP address for the standard
gateway, by means of which the local
network is connected with the Internet.
This is generally the local (private) IP
address for your router (e.g.
192.168.2.1). Your phone requires this
information to be able to access the
Internet.
192.168.2.1 has been preset.
= Static:
Subnet mask
Web configurator –configuring phone via PC
Preferred DNS server
Enter the IP address for the preferred
DNS server. DNS (Domain Name Sys-
tem) allows you to assign public IP
addresses to symbolic names. The DNS
server is required to convert the DNS
name into the IP address when connec-
tion is being established to a server.
You can specify your router's IP address
here. The router forwards phone
address requests to its DNS server.
192.168.2.1 has been preset.
(optional)
Alternate DNS server
Enter the IP address for the alternative
DNS server that should be used in situ-
ations where the preferred DNS server
cannot be reached.
Click to save the changes.
Set
Click to reject the changes.
Cancel
Allowing access from other networks
The default setting for your phone is set so
that you can only access your phone's Web
configurator via a PC that is in the same
local network as your phone. The subnet
mask of the PC must match that of the
phone.
You can also allow access from PCs in
other networks.
Warning:
Expansion of access entitlement to other net-
works increases the risk of unauthorised
access.
It is therefore recommended that you deacti-
vate remote access again if you no longer
require it.
¤
Open the following Web page:
¢
Settings IP Configuration.
¤
In the
Remote Management
the option to permit access from
Yes
other networks.
To deactivate remote access, click the
option. Access is then limited to PCs
No
in your own local network.
area, activate
97