Maintenance; Specifications; Transporting And Storing Outboard Motor - Outboards Group 2.5A Owner's Manual

Maintenance

Specifications

NOTE:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
Dimension:
Overall length:
628 mm (24.7 in)
Overall width:
289 mm (11.4 in)
Overall height S:
997 mm (39.3 in)
Overall height L:
1124 mm (44.3 in)
Transom height S:
441 mm (17.4 in)
Transom height L:
568 mm (22.4 in)
Weight (AL) S:
16.5 kg (36 lb)
Weight (AL) L:
17.5 kg (39 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
1.8 kW@5000 r/min (2.5 HP@5000 r/min)
2.6 kW@5000 r/min (3.5 HP@5000 r/min)
Idling speed (in neutral):
1200  50 r/min
Engine:
Type:
2-stroke S
Displacement:
70.0 cm³ (4.27 cu.in)
Bore  stroke:
46.0  42.0 mm (1.81  1.65 in)
Ignition system:
CDI
Spark plug (NGK):
BR6HS-10
25
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
Tiller
Starting system:
Manual
Starting carburetion system:
Choke valve
Drive unit:
Gear positions:
Forward-neutral
Gear ratio:
2.08 (27/13)
Trim and tilt system:
Manual tilt
Propeller mark:
BS
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. research octane:
90
Fuel tank capacity (built in type):
1.4 L (0.37 US gal) (0.31 Imp.gal)
Recommended engine oil:
OUTBOUARDLUBE 2-stroke outboard motor oil
Fuel:oil ratio:
Regular gasoline:
100 :1
Lubrication:
Pre-mixed fuel and oil
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
75.0 cm³ (2.54 US oz) (2.65 Imp.oz)
Tightening torque for engine:
Spark plug:
25.0 Nm (18.4 ft-lb) (2.55 kgf-m)
Transporting and storing out-
board motor
WARNING
Leaking fuel is a fire hazard. When trans-

porting and storing the outboard motor,
close the air vent screw and fuel cock to
prevent fuel from leaking.