Auto Filter Cleaning, Timer Filter Cleaning - Panasonic CS-XE12EKE Operating Instructions Manual

AUTO FILTER CLEANING
Filter Cleaning Indicator
AUTO AUTO
• Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned
off using remote control).
• After the filter cleaning is completed, the air conditioner operation will remain off.
AIR CONDITIONER TIMER AIR CONDITIONER TIMER
• Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned
off by the air conditioner timer).
• After the filter cleaning is completed, the air conditioner operation will remain off.
FORCE CLEANING FORCE CLEANING
• Once the air conditioner operation time exceeds 24 hours, the unit is forced to run filter cleaning.
• After the filter cleaning is completed, the air conditioner operation will resume automatically.
Troubleshooting
● Timer indicator is blinking and error code H51 is
revealed on the display.
● Timer indicator is blinking and error code H52 is
revealed on the display.
Note :
• To reveal the error code, please refer to Product Overview's troubleshooting-error code checking.
• The condition above does not affect the unit's operation.
• In case of malfunction, please consult your nearest authorized dealer.
► The fi lter cleaning device is jammed because the fi lter is not installed
correctly.
► The fi lter cleaning device is malfunction.
► The fi lter cleaning device is malfunction.
► Printed circuit board is malfunction.
■ About
Filter cleaning
• The fi lter cleaning indicator light
will move to left or right when fi lter
cleaning is in progress.
• Filter cleaning in progress will be
cancelled if:
- Certain button on the remote
control are pressed.
- The air conditioner main unit's
movable front panel is lifted up.
- There is a power failure.
7