Enabling The Soft Ap Function Using "Ricoh Printer - Ricoh SP 150w Wi-Fi Connection Manual

2. Press and hold the
longer.
The power indicator turns blue and the Wi-Fi function is ena-
bled on the printer.
3. Press and hold the
longer.
The power indicator flashes twice and the Soft AP function is
enabled on the printer.
4. Set papers on the printer.
5. Press the power key three times successively.
The System Settings are printed out from the printer.
6. Confirm that the Soft AP function is enabled on the
System Settings sheet.
• [Enable] or [Disable] is displayed for [Soft AP] under the
[Wireless Network] category.
If the Soft AP is not enabled, perform the procedure from 1
again to enable the function.
7. Click the wireless network icon on the task bar on
the computer.
Available access points are searched for, and found access
points are displayed in the list.
8. Click the printer in the list.
9. Enter the password for Soft AP, and click [Connect].
• You can find the password for Soft AP in [Passphrase] under
[Soft AP] on the System Settings sheet.
• The SSID and password for Soft AP can be changed using
"RICOH Printer".
For details, see page 7 "Enabling the Soft AP function using
"RICOH Printer"".
• To disable the Soft AP function, press and hold the
key for 1 second or longer. The power indicator flashes three
times, and the function is disabled.
You can now print files on the computer via Wi-Fi network by
selecting "Print" from the "File" menu of applications or use the
functions of "RICOH Printer".
Enabling the Soft AP function using
"RICOH Printer"
• Install "RICOH Printer" to your computer first. For details, see
page 3 "Installing the Printer Driver and "RICOH Printer"
Software".
1. Press and hold the
printer.
power key for 1 second or
power key for 1 second or
power key to turn on the
2. Connect the computer with the printer using a USB
cable or via a Wi-Fi router.
• For the Wi-Fi router connection, see page 3 "Connecting with
a Computer via a Wi-Fi Router".
3. Click "RICOH Printer" icon on the desktop.
The application is launched.
4. Click [Settings].
5. Click [Soft AP].
• The SSID and password for the printer are set by default.
• You can change the SSID and password for Soft AP. Click the
power
text box of [SSID], and enter an SSID in 1 to 32 characters
(specify with US ASCII characters). Click the text box of [Pass-
word], and enter a password in 8 to 63 characters.
6. Toggle the switch to "Open" position to enable the
Soft AP function, and click [Apply].
7