2 port ieee-1394 firewire cardbus adapter with digital video editing kit infosafe 2.5” usb 2.0 on-the-go drive enclosure 7 port usb 2.0 hub cable zen 6.6 ft (2m) hdmi digital audio/video cable 2 port starview usb kvm switch kit with cables (2 pages)
Page 1
Universal Tripod Floor Stand for Tablets STNDTBLT1A5T *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the latest information, technical specifications, and support for this product, please visit www.startech.com/STNDTBLT1A5T.
Page 2
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Table of Contents Product diagram ..................1 Front view of tablet holder ........................1 Rear view of tablet holder ........................1 Introduction ....................2 Packaging contents ..........................2 Product overview ............................3 Assemble the tripod ................4 Attach a tablet to the tripod ..............6 Adjust the tablet holder ................7 Remove the tablet ..................7 Technical support ...................8...
Product overview Dimensions of tripod when it’s not extended and the tablet holder is attached 74.5 cm (29.3 in.) Dimensions of tripod when it’s extended and the tablet holder is attached 157.5 cm (62 in.) Instruction manual...
Assemble the tripod 1. Hold the tripod pole and turn the knob on the tripod to the left to loosen the legs on the tripod stand. 2. Pull out all three of the legs and turn the knob on the tripod to the right to lock the legs in place.
Page 8
4. Move the tripod pole up or down to your desired height and turn the hand screw on the tripod to the right to tighten it. 5. Turn the joiner that connects the two halves of the tripod pole to the left to loosen 6.
Attach a tablet to the tripod The tablet holder is designed to hold tablets that are between 7 in. and 10. in. in size. 1. With the tablet screen facing upwards, slide one of the long sides of the tablet into one of the retractable brackets on the tablet holder.
Adjust the tablet holder The tablet holder moves in 90 degree increments in either direction, so the tablet can be in either landscape or portrait position. To move the tablet holder, grasp the side of the tablet and move it in the direction that you want it to go in. When you have moved the tablet holder 90 degrees, you will hear a click to indicate that the tablet holder is in place.
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 12
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the STNDTBLT1A5T and is the answer not in the manual?
Questions and answers