Table of Contents
Advertisement
AUTO, HEAT, COOL, DRY
1
1
MODE
Select the
desired
operation.
● Supersonic air purifying device operates automatically once
the unit is switched on.
QUIET
POWERFUL
●
and
operations are available in all modes.
OFF/ON
● Press
again to stop the operation.
Troubleshooting
● Mist emerges from indoor unit.
●
Heating/Cooling operation does not work.
● Water fl owing sound during operations.
● The power indicator blinks during the operation and
the indoor fan is stopped.
FAN
AUTO
SPEED
HEAT
COOL
DRY
AIR
SWING
OFF/ON
MODE
QUIET
TEMP
POWERFUL
FAN SPEED
AIR SWING
TIMER
ON
SET
1
2
3
OFF
CANCEL
AC
RC
SET
CHECK
CLOCK
RESET
► Condensation effect due to cooling process.
► Ensure temperature is set correctly.
► Make sure windows and doors are closed.
► Make sure fi lters are cleaned and replaced.
► Make sure inlet and outlet vents are cleared.
► Cause by refrigerant fl ow inside the unit.
► The unit is in defrost mode, and the melted frost is drained from the
2
2
OFF/ON
Start the
operation.
3
3
Set the
temperature.
(16°C~30°C)
outdoor unit.
■
Operation Details
AUTO - Automatic Operation
• Unit selects the operation mode
according to temperature setting,
outdoor and room temperature.
• The power indicator blinks during
operation.
• Operation mode is reselected
every 30 minutes.
HEAT - Heating Operation
• In heating mode, it takes a while
for the unit to warm up. The
power indicator blinks during this
operation.
COOL - Cooling Operation
• Enjoy cool air at your desired
temperature.
DRY - Soft Dry Operation
• Keeps your environment
dehumidifi ed by running a very
gentle cooling operation.
• During soft dry operation, the
indoor fan operates at low fan
speed.
■
Hint
• A temperature setting 1°C higher
in cooling operation or 2°C lower in
heating operation than the desired
temperature equates to a 10%
power saving.
5
Hide quick links:
Advertisement
Table of Contents
