Combined Paging; Conference Calls; Selectable Ring Tones - NEC SV9100 User Manual

COMBINED PAGING

CONFERENCE CALLS

CALL LOG
SET INTERCOM TO EITHER
RINGING OR HANDSFREE

SELECTABLE RING TONES

❑ Make Announcement and replace handset
(Note: This feature only works if an external speaker is installed)
To page both internal & external zones:
❑ Lift Handset
❑ Dial *1
❑ Make Announcement and replace handset
To set up a Conference Call:
While on an Outside call or connected to your first party
❑ Press Conf Key on Display
❑ Dial an outside line or second party
(When called party answers)
❑ Press Add key on screen
(Repeat steps 2-4 to add more parties. Maximum of 16 internal or external
parties can be conferenced).
❑ Press Begin to start conference
To exit a Conference without affecting the other parties:
❑ Hang up
To view numbers of calls received / missed on your handset
❑ Press List button on the Display
❑ Press CID button on the Display
❑ Scroll ! Down soft key to desired number
❑ Lift Handset to call – Handset will dial automatically
To select your intercom to be hands free:
❑ Press Speaker
❑ Dial 721
❑ Press Speaker to hang up
To select your intercom to be ringing:
❑ Press Speaker
❑ Dial 723
❑ Press Speaker to hang up
To CHANGE your Extension's
❑ Press Speaker key
❑ Dial 720
❑ Dial 1 to set intercom ring, or 2 to set external call ring
❑ Dial Code for the ring pattern you wish to hear:
1 = High
2 = Mid Range
3 = Low
4 = Ring Tone 1
❑ Press Speaker to Hang Up
To Listen to the Incoming ring choices
incoming ring tones:
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
! 5