1 Review and confirm your plans
Overview
HP Command View EVA can be implemented in two ways:
Server-based management - HP Command View EVA is installed on a management server connected
•
to the EVA, providing management of multiple HP EVA storage systems. All components of the
software suite (HP Command View EVA, HP Command View EVAPerf, HP Storage System Scripting
Utility, SMI-S EVA) are installed. Server-based management is applicable to all EVA models.
Array-based management - Beginning with HP Command View EVA 8.1, the EVA4400 is shipped
•
with HP Command View EVA pre-installed on the management module within the controller en-
closure. Only one component of the software suite (HP Command View EVA) is installed. Array-
based management is applicable to the EVA4400 only.
Before installing the EVA, HP recommends that you:
•
Develop an installation and configuration plan for your environment.
•
Review all videos and documentation.
•
Determine if the EVA will be fabric-attached (connected to Fibre Channel switch) or direct-attached
(connected to Fibre Channel adapter in server). The EVA4400 is factory configured for fabric-at-
tached. To change to direct-attached mode, see
NOTE:
Models of the EVA4400 with an embedded switch (also known as the HSV300-S controller) are
configured in fabric-attach mode and must remain fabric-attached.
Plan your storage configuration
Proper planning of the system storage and its subsequent performance is critical to a successful
deployment of the EVA. Improper planning or implementation can result in wasted storage space,
degraded performance, or inability to expand the system to meet growing storage needs.
Considerations include:
•
System and performance expectations
HP StorageWorks 4400 Enterprise Virtual Array installation guide
Chapter
7.
17