Procedure; Confirm Migration; Accessing New Features After Migration; Negating Migration Changes - HP XP1024 User Manual

Procedure

1. Use the procedures in the installation guides for Command View AE and Command View to install the
applications.
Set up the supported CLI client and Web client environments as described in the HP StorageWorks
2.
Command View XP AE Device Manager Command Line Interface Application User Guide and HP
StorageWorks Command View XP AE Manager Web Client User Guide, respectively.
NOTE: Use Command View and Command View AE to manage a disjointed set of arrays. For example,
use Command View to manage arrays A, B, and C, and use Command View AE to manage arrays D
and E.

Confirm migration

•
Confirm that Command View services are started in the management server.
•
Confirm that Command View AE services are started on the server.
•
Confirm that the server can collect data from the host agents.

Accessing new features after migration

• To access Command View AE, launch your browser and type the following:
<http or https>://<DNS name or IP address of management server>:<install
port> (default is 23015)/DeviceManager/Login.
For example, http://12.12.12.12:23015/DeviceManager/Login
•
To access Command View, point your browser directly at the array public IP address (for example,
http://123.45.67.890).

Negating migration changes

Uninstall all of the applications to back out of the migration changes. Follow the uninstall instructions in the
installation guides for Command View, Performance Advisor, Application Policy Manager, and Command
View AE.
NOTE: For information about integrating with other applications, see
page 28
Scenario 5: Command View AE and Command View installed on different
management servers

Environment

Command View AE and Command View are installed on different management servers. Some arrays are
managed with Command View, and others are managed with Command View AE. No array can be
managed by both Command View and Command View AE at the same time.
NOTE: Do not use both Command View and Command View AE to manage the same array(s). This type
of management is not supported.

Requirement(s)

•
The management servers must meet the requirements of both Command View and
Command View AE. See
•
Command View and Command View AE must reside on separate, supported servers.
•
Remote Web Console clients must meet the requirements for both Command View and Command View
AE.
26 Migration
Table 11.
"Application-related migrations" on