Table of Contents
Advertisement
= Low water level
= Medium water level
= High water level
= Intensive rhythm
= Normal rhythm
= Sensitive rhythm
= Ultra sensitive rhythm
= Handwash rhythm
= Carried out
–
= Not carried out
The washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
The washing machine programme
sequence display shows which stage of
the programme has been reached.
Programme sequence
Special features in the
programme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens and Silks
programmes.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60 °C or higher is
selected, or with and
temperatures, 2 rinses are carried out.
If a temperature of less than 60 °C is
selected, 3 rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
3)
An additional rinse is carried out if:
– the Water plus option is selected and
the Extra rinse or Water + and Extra
rinse setting has been activated for
the Water plus option in Settings.
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment .
5)
An additional rinse is carried out if:
the Water plus option is selected.
37
Hide quick links:
Advertisement
Table of Contents
