Levelling The Machine; Screwing Out And Adjusting The Feet - Miele WMB 120 Operating Instructions Manual

Table of Contents

Advertisement

Installation and connection

Levelling the machine

The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
 Using the spanner supplied turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
64
 Use a spirit level to check that the
washing machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it sits
firmly up against the housing.
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents