Offset Menu - ADJ VIZI BEAM RXONE User Instructions

Vizi Beam RXONE
Reset
- Use this function to reset the motors.
1. Tap the MENU button until "Reset" is displayed, press ENTER.
2. The fixture will now reset.
Vizi Beam RXONE
To enter the Offset Menu, press the ENTER button for at least 5 sec-
onds. In this submenu you are able to adjust the home position of the
pan, tilt, shutter, color wheel, gobo, and prism.
Pan
- Adjustment of the pan home position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Pan" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
TILT
- Adjustment of the tilt home position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Tilt" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 32
System Menu Vizi Beam RXONE
Dimmer
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Dimmer" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second

Offset Menu

to exit.
Color
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Color" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Gobo
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Gobo" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Prism
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "Prism" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
- Setting adjustment for the Shutter.
- Setting adjustment for the color wheel.
- Setting adjustment for the gobo wheel.
- Setting adjustment for the 1st prism.
ADJ Products, LLC - www.adj.com - Vizi Beam RXONE Instruction Manual Page 33
Offset Menu