System Menu - ADJ Startec Series Mini Dekker LZR User Manual

Mini Dekker LZR
System Menu: When making adjustments, press ENTER to confirm your setup, then press and hold
the MENU button for at least 3 seconds. To exit without making any adjustments press the MENU
button. The display will lock after 30 seconds. Press the MENU button for 3 seconds to unlock.
ADDR - DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until "ADDR" is displayed. Press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find
your desired address. Press ENTER to set your desired DMX address.
CHND - This will let select your desired DMX channel mode.
1. Press the MENU button until "CHND" is displayed, and press ENTER. The current DMX channel
mode will be displayed.
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to
confim and exit.
SHND - Show modes 0-2 (Factory programs).
1. Press the MENU button until "SHND" is displayed, and press ENTER.
2. "Sh X" will now be displayed, "X" representing a number between 0-2. Shows 1-2 are factory
programs, while show "0" is random mode. Use the UP or DOWN buttons to find your desired
show.
3. When you have found your desired show press ENTER, then press and hold the MENU button
for at least 3 seconds to activate. After you have set your desired show, it can be changed at any
time using the UP or DOWN buttons.
SPEE - Show mode speed.
1. Press the MENU button until "SPEE" is displayed, and press ENTER.
2. A number between 0-100 will now be displayed, representing the current speed setting. Use the
UP or DOWN buttons to adjust the show speed. "0" is the slowest speed and "100" is the fast-
est.
3. Press ENTER to set the speed then press and hold the MENU button for at least 3 seconds to
exit.
SCND - This will let you set unit as a primary or secondary in a primary/secondary configura-
tion.
1. Press the MENU button until "SCND" is displayed, and press ENTER. Either "PRI", "SEC1", or
"SEC2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, and press ENTER to con-
firm.
NOTE: In a Primary/Secondary configuration, if one fixture is set to Primary and the next is set to
"SEC 2", the fixtures will now have contrasting movements.
SOUN - Sound Active mode.
1. Press the MENU button until "SOUN" is displayed, and press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to
activate sound active mode, or "OFF" to deactivate sound active mode.
3. Press ENTER to confirm.
ADJ Products, LLC - www.adj.com - Mini Dekker LZR User Manual Page 13

System Menu