Usb Cable Mount Bracket Removal; Operator Panel Support Removal - Lexmark X46x series Service Manual
Hide thumbs
Also See for X46x series:
- User manual (321 pages) ,
- Service manual (304 pages) ,
- Administrator's manual (79 pages)
Table of Contents
Advertisement
7014-xxx
USB cable mount bracket removal
1.
Remove the operator panel keypad.
2.
Open the USB cable clamp and remove the USB cable.
3.
Remove the screw (A) securing the USB cable mount bracket to the tub assembly.
Operator panel support removal
1.
Remove the operator panel keypad.
2.
Remove the three screws (A) securing the operator panel support to the tub assembly.
Note: The same steps are performed for both supports.
4-68
B
A
A
Advertisement
Table of Contents
