Charging In The Jet Clean System (Specific Types Only) - Philips RQ1100 series Directions For Use Manual

English
14
Charging in the Jet Clean System (specific
types only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder
with the back of the shaver pointing towards
the holder.
Note: RQ1180 only: when you turn the shaver upside
down, the battery indication on the display is also
turned upside down so you can still see to what level
the battery is charged.
4 Place the shaver body in the holder behind the
two clips (1) and press it down until it locks
into place (2).
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit
or when the trimmer is placed on the shaver.
, The display shows that the shaver is charging
(see chapter 'The display').
Using the shaver
shaving
skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system.
We advise you to shave regularly (at least 3 times
a week) for a period of 3 weeks to allow your skin
to adapt to the new shaver. During this period, use