Dell Latitude 5420 Owner's Manual page 152

System Configuration
Drives
Video
LCD Brightness
NOTE: The Video setting will only be visible when a video card is installed into the system.
Security
Admin Password
System Password
Internal HDD-0 Password
Password Bypass
152
Downloaded from LpManual.com Manuals
• Disabled
• Level is 25%
• Level is 50%
• Level is 50%
• Levels is 100%
Default Setting: Level is 75%
Allows you to configure the SATA drives on board. The options are:
• SATA-0
• SATA-1
• SATA-4
• SATA-5
Default Setting: All drives are enabled.
Allows you to set the display brightness depending up on the power source (On
Battery and On AC).
Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard
drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Deleting the admin password automatically deletes the system
password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set or change the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to enable or disable the permission to bypass the System and the
Internal HDD password, when they are set. The options are:
• Disabled
• Reboot bypass