Sanyo FWBP706F Owner's Manual page 57

Problem
A Music/Photo fi le does not play.
No return to start-up screen when
disc is removed.
in the upper left hand corner of
the TV screen.
Buttons do not work or the unit
stops responding.
The unit does not respond to
some operating commands during
playback.
The unit cannot read Blu-ray
Disc™ / DVD/CD Disc.
Title Repeat cannot be performed
with certain DVDs. (Repeat setting
is cancelled.)
Scene shooting Angle does not
switch.
Playback does not start when a
Title is selected.
Cannot play back AVCHD fi le.
The capacity of the USB Memory
Stick decreased.
Cannot play back a MPEG-2 video
and audio from the USB Memory
Stick.
Cannot read the contents on the
USB Memory Stick.
Cannot play back BD-Video.
EN
Confi rm that the fi le type is supported.
Refer to page 20 for the compatible fi le extentions.
The fi le may be corrupted.
Check to see if it is playable on a PC or other devices.
Soft Reset this unit by turning it Off for 30 seconds, then On again.
To completely Reset the unit, press and hold [y(POWER/Standby)] on the
front panel for 10 seconds to shut down the unit or unplug the AC Power
cord from the AC outlet for 5-10 seconds.
The operation is not possible.
To Soft Reset the unit, press and hold [y(POWER/Standby)] on the front
panel for 10 seconds to shut down the unit or to hard Reset the unit by
unplugging the AC Power cord from the AC outlet for 5-10 seconds.
The operations may be prohibited by the disc. Refer to the instructions
for the disc.
Condensation? (Let the unit sit and dry for 1 or 2 hours)
Check to see if the disc is compatible with this unit. (Refer to page 19.)
Wipe dirt off the disc from the center to the outside or replace the disc.
Refer to "Cleaning Discs" on page 62.
Depending on the DVD, there is a possibility that Title Repeat is not
available.
Angles cannot be switched for Blu-ray Disc™ / DVD which do not contain
multiple Angles. In some cases multiple Angles are only recorded for
specifi c scenes.
Check the settings in "Parental Control" menu.
This unit cannot play back stand-alone AVCHD fi les (*.m2ts, *.mts or
*.m2t) written to a DVD. The DVD containing AVCHD fi les must have a
proper fi le and folder structure meeting AVCHD format specifi cations.
Please use AVCHD compliant Device / Software to burn or copy AVCHD
fi les to DVD. (Please refer to User Manuals of the Device / Software for
more information.)
Data may be written on the USB Memory Stick when a BD-Video uses
the Virtual Package feature while a USB Memory Stick is connected to
the unit.
MPEG-2 is not compatible with this unit.
The USB Memory Stick is not compatible with this unit or the contents
may be damaged.
Turn Off the unit, then turn it back On.
To Soft Reset the unit, press and hold [y(POWER/Standby)] on the front
panel for 10 seconds to Shut Down unit to Standby mode or to Hard
Reset the unit by Unplugging the AC Power cord from the AC outlet for
5-10 seconds.
Connect a USB Memory Stick (1GB or more of available memory).
Some discs with BD-Live™ function require memory when playing back
content.
Do not disconnect the USB Memory Stick during playback.
57
T ip
continued on next page