Sanyo FWBP706F Owner's Manual page 45

Scan
1. Follow steps 1 to 5 in "Auto" on page 44.
2. Use [ ] to select "Scan", and use [
• This unit will automatically start searching for nearby wireless networks.
3. The search result will be displayed. Use [
• If you select an SSID with "NONE" in the Security column, move on to step 7.
Network
Language
access_point_
access_poi...
Streaming Co...
access_poi...
Security access_poi...
access_poi...
System access_poi...
4. "WEP / WPA / WPA2 Key" entry screen will appear. Use [
The Software Keyboard will appear.
Network
Language
Streaming Co...
Security
System
5. Enter the WEP / WPA / WPA2 Password of the selected wireless network using Cursor buttons and [OK].
After entering the Password, select "Enter", then press [OK].
• If you do not know the WEP / WPA / WPA2 Key for your wireless network, please confirm the sticker on
the Router.
• The WEP / WPA / WPA2 Key entries are case-sensitive.
EN
Setup
SSID Security Signal Strength
WPA2-PSK 100%
WPA-PSK 100%
WPA2-PSK 100%
WPA2-PSK 100%
WPA-PSK 100%
WPA2-PSK 100%
Setup
WPA-PSK
Previous Next
Exit
Setup
a b c d e 1 2 3
f g h i j 4 5 6
k l m n o 7 8 9
p q r
s t . @ 0
u v w x y z ABC
Back Space Enter Clear
] to select "Next", then press [OK].
] to select an appropriate SSID, then press [OK].
] to select the input fi eld, then press [OK].
45
continued on next page