Network Status - Sanyo FWBP706F Owner's Manual

7. "WEP / WPA / WPA2 Key" entry screen will appear. Use [
entry fi eld, then press [OK]. The Software Keyboard will appear.
8. Enter the WEP/WPA/WPA2 Password of the selected wireless network using Cursor buttons and [OK].
After completing the Password entry, select "Enter", then press [OK].
• If you do not know the WEP/WPA/WPA2 Key for your wireless network, please check if it is on a sticker
on the Router or ask someone in your household who might know the Password.
• The WEP / WPA / WPA2 Key entries are case-sensitive.
9. Use [ ] to select "Next", then press [OK].
10. "Connection success and IP is obtained." will be displayed. Press [OK] to complete the Settings.
C Network Status
You can check the current status of Network Status and Wireless status.
1. Follow steps 1 to 3 in "Connection Test" on page 41.
2. Use [ ] to select "Network Status", then press [OK].
• The current Network Settings and Wireless Router Setting will be displayed.
3. Press [HOME] to return to the Home Menu.
C Netfl ix ESN
You can view the ESN (Electronic Serial Number, which Netfl ix uses to identify your device).
Netfl ix customer service might ask you for this number during troubleshooting.
1. Use [
2. Use [ ] to select "
3. Use [ ] to select "Streaming Content", then press [OK].
4. Use [ ] to select "Netfl ix Information", then press [OK].
5. Press [HOME] to return to the Home Menu.
EN
] to select "Setup" in the Home Menu, then press [OK].
", then press [OK].
] to select the WEP / WPA/ WPA2 Password
47