Renault DUSTER Driver's Handbook Manual page 53

TRIP COMPUTER AND WARNING SYSTEM
The information display DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Interpreting some of the
values displayed after
resetting
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing the
reset key you will notice that the range
increases as you travel. This range
takes into account the average fuel con-
sumption since the last time the reset
button was pressed. Therefore, the fuel
consumption may decrease when:
– the vehicle stops accelerating,
– the engine reaches its operating
temperature (engine cold when
reset button pressed),
– when driving from a built-up area
onto the open road.
Therefore, if the average fuel con-
sumption decreases, the range
will increase.
ENG_NU_898-5_H79_Dacia_1
Downloaded from www.Manualslib.com
– You may also notice that the aver-
age fuel consumption increases
when the vehicle is stationary and
the engine idling.
This is normal, since the computer
takes account of fuel used during
idling.
Manually resetting the journey pa-
rameters: with the display showing
one of the journey parameters, press
button 2 until the display is reset.
Automatically resetting the journey
parameters: the reset is automatic
when the capacity of one of the memo-
ries is exceeded.
manuals search engine
(2/4)
ENG_UD20512_3
Ordinateur de bord (H79 - Dacia)
1.47