Unpacking And Removing Shipping Material - Kenmore 796.3140* Use & Care Manual

UNPACKING AND REMOVING SHIPPING MATERIAL
When removing the washer from the carton base, be
sure the plastic tub support comes off with the base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the
washer and lay it carefully on its side. DO NOT lay
the washer on its front or back.
f
Tub support
Carton Base
1. After removing the carton and shipping material,
lift the washer off the foam base. Make sure the
plastic tub support comes off with the base and
is not stuck to the bottom of the washer.
2. Save the foam block for future use. If the washer
must be moved in the future, this will help prevent
damage to the washer during transportation.
3. Carefully remove the two foam pads which cover
the top sides of the tub guide, making sure not to
leave behind any pieces of the foam.
J
4. Unfasten the power cord from the back of the
washer.
TOOLS YOU WILL NEED
• Adjustable Pliers
• Carpenter's Level
NOTE: To prevent damage, do not remove the foam
block until the washer is at the final location.
8