Installation Instructions; Unpacking And Removing Shipping Material - Kenmore 796.316221 Use & Care Manual

UNPACKING AND REMOVING SHIPPING MATERIAL

When removing the washer from the carton base, be sure
the plastic tub support comes off with the base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the
washer and lay it carefully on its side. DO NOT lay the
washer on its front or back.
Tub support
1. After removing the carton and shipping material, lift
the washer off the foam base. Make sure the plastic
tub support comes off with the base and is not stuck
to the bottom of the washer.
2. Save the foam block for future use. If the washer
must be moved in the future, this will help prevent
damage to the washer during transportation.
NOTE: To prevent damage, do not remove the foam block
until the washer is at the fi nal location.

INSTALLATION INSTRUCTIONS

Carton Base
8
Pad
3. Carefully remove the two foam pads which cover
the top sides of the tub guide, making sure not to
leave behind any pieces of the foam.
4. Unfasten the power cord from the back of the
washer.
TOOLS YOU WILL NEED
• Adjustable Pliers
• Carpenter's Level