Checking The Printer; Loading Paper - Epson Stylus color 860 Setup Manual

Press the B A cleaning button. The printer moves the print head and
7.
begins charging the ink delivery system. This process takes about one
and a half minutes.
While the ink is charging, the P power light flashes and the printer
produces a variety of mechanical sounds. These sounds are normal.
When the ink delivery system has been charged, the print head returns
to its home (far right) position and the P power light comes on.
c
Caution:
Never turn off the printer while the P power light is flashing.
8. Close the printer cover.

Checking the Printer

Before printing your first page, you need to make sure the printer is working
correctly by printing a nozzle check page and, if necessary, cleaning the
print head.

Loading paper

Follow these steps to load plain paper in the printer.
1. Lower the output tray and slide out the extension. Next, slide the left
edge guide so that the distance between the edge guides is slightly
wider than the width of your paper.
edge guide
2. Fan a stack of paper; then tap it on a flat surface to even the edges.
output tray