Channel Swap; Super Receiving Function; Progam Scan - Palsonic 5159G Owner's Manual

OPERATION
Other functions (continued)

CHANNEL SWAP

Making use of CHANNEL SWAP you can reorder the programs in your
favorite order.
Press the MENU button repeatedly to select and
highlight SWAP icon. Press VOL +/- button to
enter into CHANNEL SWAP menu.
Press POS +/- button to select "POSITION A: -"
item, then input the desired channel number
which you want to swap by pressing "0-9" or "--/---"
button.
Press POS+/- button to select "POSITION B: -" item,press "0-9" or
"--/---" button to input the channel number which you want to swap to.
Press the POS+/- button to select "EXCHANGE" item, press VOL +/- button
to confirm. Then channel A and channel B's programs are swapped.

Super receiving function

Below we will describe how to make use of super
receiving function.
Pressing the SUPER button on the remote
controller can change the current program's super
receiving mode to ON or OFF.
Or you can press PRESET button to enter into
PRESET menu, press POS+/-button to select
S-RCV item, press VOL +/- button can change the
current program's super receiving mode to ON or
OFF.
Note : 1) After AUTO SEARCH (ASM). all the searched programs are set to S-RCV OFF automatically
2) When receiving signals are stronger, please set to S-RCV to OFF mode
Program Scan
Press SCAN button, the TV set will scan the channels
from current channel to higher channels one by one, the
upper right corner of the screen will display position
number, ever program will be displayed for about 2
seconds and then go on scanning until all the programs
are scanned over.
Press SCAN button again, the screen will settle at the
current scanned program.
CHANNEL SWAP
18
SWAP
POSITION A: 5
POSITION B :14
EXCHANGE : OK
S-RCV ON
PRESET
POS
22
SKIP OFF
BAND UHF
FINE
AFT OFF
SEARCH
ASM
or ON
S-RCV OFF
7
SCAN
14