Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
INTRODUCTION Features Hyperband English/Chinese on-screen menu display 256 preset channels Intellectualized I C-bus control Full function remote control SLEEP timer, ON Timer, OFF Timer Non-signal blue background display and AUTO-POWER-OFF function Games, built-in 500 years' calender Child Lock function, channel swap Program scan function Five picture modes' setting AUDIO/VIDEO input &...
NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.
Installation Antenna Connection To ensure a bright-colored and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not...
OPERATION Turning the Power On/Off & Menu Operation The following describes how to turn the TV on/off using the TV's main switch and the remote controller. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. If no picture appears on the screen, press the button on the set or on the remote controller to turn the set on and the yellow indicator light up.
OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. To preset channels (ASM) Use the ASM (Automatic Search Memory) function to preset all the active channels in your local area automatically.
OPERATION Tuning in (continued) Use the SEARCH function if desired channels can not be preset with the ASM or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP functions.
OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button. PRESET Enter into the PRESET menu, press the POS+/- SKIP...
OPERATION Tuning in (continued) AFT (Automatic Frequency Tuning) If picture and sound’s effect of the channel is instead poor by making use PRESET of FINE, you can correct them by making use of AFT. SKIP BAND FINE Enter into the PRESET menu, press POS+/- button to SEARCH select AFT, press VOL+/- button to select AFT ON.
OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. To watch a TV programme You can select your desired TV program by one of the following methods. Using the direct select buttons (0~9) and --/---button To select a one-digit position number (0-9) Press the 0~9 button directly.
OPERATION Convenient Picture and Sound Controls Selectable picture To select the picture mode You can select the picture quality instantly among four preset modes and one user-set mode. Press the P.M button to select the desired picture quality. SOFT STANDARD SOFT, STANDARD , VIVID , LIGHT and PERSONAL VIVID (user-set) can be selected cyclically.
OPERATION CLOCK SETTING CLOCK menu CLOCK Press the CLOCK button to display the CLOCK menu. (Or press the TIME --:-- MENU button repeatedly to select and highlight CLOCK icon, and press OFF-TIME --:-- VOL+/- button to enter into the CLOCK menu.) --:-- ON-TIME TIME setting...
OPERATION System setting SYSTEM menu Press the MENU button repeatly to select and highlight the SYSTEM icon. Press the VOL+ button to enter into the menu of SYSTEM. SYSTEM To select the language for the OSD (on-screen display) SYSTEM Making use of this function can switch the language for the OSD to either CHINESE ENGLISH English or Chinese.
OPERATION Playing Games In this TV set there are two built-in games: Falling Cube and Millennium Alien. Below we will describe how to make use of them. To enter into Game GAME Press MENU button to select and highlight GAME icon.
OPERATION Playing Games (continued) & SLEEP Timer Making use of MILLENNIUMALIEN Enter into MILLENNIUM ALIEN, there are characters "SHOOTING START" flying from right to left. When the characters have flied over, you can begin to shoot. Pressing VOL+ button can move the battleplane on the lower screen rightward, pressing VOL- button can move the battleplane leftward, pressing POS+/- button can shoot the bullet out.
OPERATION Other functions CALENDAR function(1800-2299) Press MENU button repeatedly to select and highlight CALENDAR CALENDAR icon, press VOL+/- button to enter into calendar interface. Pressing the POS+/- button can check years' calander forward or backward. Pressing the VOL+/- button can check months calendar MAY 2007 of some year forward or backward.
OPERATION Other functions (continued) CHANNEL SWAP Making use of CHANNEL SWAP you can reorder the programs in your SWAP favorite order. Press the MENU button repeatedly to select and highlight SWAP icon. Press VOL +/- button to enter into CHANNEL SWAP menu. Press POS +/- button to select "POSITION A: -"...
CONNECTING OTHER EQUIPMENT External Equipment Connections This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. Refer to the owner’s manual of the equipment to be connected as well. Video playback The figure below shows how to connect the TV set to the video equipment.
OTHERS Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Symptoms Check for the following items No power, red indicator is not lit up Be sure the power cord is plugged in. Contrast, colour, tint are not correctly Poor colour, poor tint adjusted.
OTHERS Specifications Power supply: AC 240V, 50Hz Power consumption: < 70W Dimensions(mm): 590(W) x 472(H) x 479(D) Weight(kg): 51cm TV system & channel range CATV System PAL-B/G 2-12 21-69 X~Z+2, S1~S41 PAL-BG, NTSC (AV) Colour system: 2.5W Sound output: Accessory: One remote controller * Note: Design and specifications are subject to change without notice.