OPERATION
Channel selection
You can watch TV programmes being broadcast on the preset channels.
To watch a TV programme
You can select your desired TV program by one of the following methods.
Using the direct select buttons (0~9) and --/---button
To select a one-digit position number (0-9)
Press the 0~9 button directly.
To select a two-digitposition number (10~99)
Press --/--- button to display -- on the screen, then press the
channel number.
To select a three-digit position number (100-255)
Press --/--- button to display --- on the screen, then press the
channel number.
Using the POS+/- buttons
Press POS- to select lower position numbers;
POS+ to select higher ones.
Using the PREVIOUS channel button (
Press the
current viewed channel with the previous one. For
example, the channel you previously watched is 11, the
present channel is 2, press the
channel 11, press the
channel 2.
)
button on the remote controller can swap the
button, it will return to
button again it will return to
11
9
AUTO
B/G
13
AUTO
B/G
125
AUTO
B/G
3
2
1
11
2