System Selection - Palsonic 3499 Owner's Manual

OFF TIME
0 : 00
4.9.8.8 Press TIME SET button, then the OFF TIME indication is green instead of red.
OFF TIME function starts operating.
4.9.8.4 The appliance will be turned off when your setting time is up, and return to stand
by mode.
NOTE: * The built-in clock employs the 24-hour system.
* The OFF TIME function will be ineffective if the following condition occurs:
Press STAND BY button before the setting time is up.
Switch off the power before the setting time is up.

4.10 SYSTEM SELECTION

4.10.1 FUNCTION AND OPERATION.
When you press the SYSTEM button, "AUTO" "PAL" "NTSC" will display on the
screen respectively.
Press
SYSTEM
SYSTEM
OSD
AUTO
NTSC 3.58 only video
PAL
NT
SC NTSC 4.43 only video
4.10.2 Please set the "AUTO" mode by SYSTEM button normally when you watch TV
broadcasting program (PAL-B/G) or NTSC 3.58 (video) program.
Please set "PAL" mode only when you watch PAL-60 program.
Please set "NTSC" mode only when you watch NTSC 4.43 program.
NOTE:
When you don't understand the system of the program, the picture may be no colour. At this
:
time, press SYSTEM button to select the system until the colour picture displays on the screen.
OFF TIME
23 : 30
AUTO
COLOUR SYSTEM
PAL-BG
PAL-BG
PAL 60 only video
TIME SET
PAL
Press it again
Colour Sub-Carrier
4.43MHz
3.58MHz
4.43MHz
4.43MHz
4.43MHz
12
NTSC
Vertical Frequency
50Hz
60Hz
50Hz
60Hz
60Hz