Making Use Of Pps Button; Display Buttons - Palsonic 3499 Owner's Manual

4.6 Making use of PPS button (personal preference select)
Press the PPS button, the screen will display the following five mode progressively:
Press PPS
1
The above five display modes corresponding analogue quantity is shown in the following
chart:
Analogue
Display
mode
llllll
1
llllll
2
3
llllllllllllll
llllllllllllll
4
llllllllllllllll
5
4.7 DISPLAY BUTTON (DSP)
Press this button, the present channel number will be displayed on the screen. If the
electronic clock is in operation, the channel position and time will be displayed together at the
upper right corner of the screen. Press this button for second time, channel position and
colour system will be displayed. Press this button for third time to cancel display.
Press DSP
Press PPS
again
Press PPS again
BRIGHTNESS
llllll
lllllllllllllllllllllllll
lllllllllllll
llllllllllllllllllllllllll
lllllllllllll
llllllllllllll
llllllllllllllll
llllllllllllll
llllllllllllllll
lllllllllll
8
6 : 00
Press PPS
again
2
COLOUR CONTRAST
llllllllllllllll
lllllllllllllllllllllllll
llllllllllllllll
lllllllllllllll
llllllllllllllll
lllllllllllllll
llllllllllllllll
lllllllllll
llllllllllllllll
lllllllllll
Press DSP
again
9
5
lllllllllll
lllllllllll
lllllllllll
lllllllllll
lllllllllll
8
Press DSP
PAL
again