Seat angle
The seat angle can be set at 0° or 3° (see previous illustrations).
Adjust the front fork mounting so that the front fork is perpen-
dicular.
max 3°
Bear in mind the risk of tipping.
Balance adjustment/amputee position (only with 24" rear wheels)
1. Remove the rear wheel as shown in the
illustration on page 6.
2. Loosen the rear wheel attachments.
3. Change the sides of the attachments.
2
4
After adjusting the seat height or centre
of balance, always ensure that you
check the function of the anti-tips.
3. Settings
1
min 0°
3
2
4. Mount them on the rear of the frame.
5. Mount the rear wheel according to the
illustration on page 6.
10
3
5 mm