Standby Button - Palsonic 2418 Owner's Manual

PICTURE CONTROL (REMOTE CONTROL UNIT)
.
Press the PICTURE CONTROL button on the Remote Control Unit.
The FUNCTION to be adjusted is selected in sequence as shown in the following
chart at every press of the button.
PICTURE
.
Adjust the button to obtain satisfactory picture.
ON SCREEN
DISPLAY
CAPTION
FUNCTION
DISPLAY
Contrast
CONTRAST
Brightness
BRIGHTNESS
Colour COLOUR
CALL BUTTON (REMOTE CONTROL UNIT)
Press this button, the present channel number will be displayed on the screen. If the
electronic clock is in operation, the channel and time will be displayed together at the
upper right corner of the screen.
Press the button again to cancel.
STAND BY BUTTON
.
Press stand by button( ) on the appliance or the Remote Control Unit, the power indicator
is red, the appliance is set to stand by mode.
.
Press stand by button ( ) again, the appliance is turned on and the indicator is green.
CONTRAST
COLOUR
Press button
Weak
Dark
Pale
8
AM 6 : 00
CALL
8
BRIGHTNESS
Red Block Moves
Press
Strong
Light
Deep
button