1. Manuals
  2. Brands
  3. ibis Manuals
  4. Bicycle
  5. New Ripley
  6. Instruction book

ibis New Ripley Instruction Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the New Ripley and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ibis New Ripley

Summary of Contents for ibis New Ripley

  • Page 2 InstructIon Manual Notes on Tuning and Maintenance of Ibis Bicycles : Rev. G Reprinting Permitted if Source Quoted...

  • Page 3: Table Of Contents

    Fork Air Pressure Charts 38-39 enhanced functions and additional information: Rear Shock Set-Up 40-43 http://tinyurl.com/lput6oh Rear Shock Air Pressure Charts 43-45 Information on legacy Ibis models available at: MaIntaIn http://www.ibiscycles.com/bikes/ past_models Bearing Maintenance and Replacement 46-47 Frame Hardware 49-53 (Part Numbers and Exploded Views)

  • Page 4: Geometry / Quick Specs

    / QuIcK sPecs geoMetry / QuIcK sPecs NEW RIPLEy RIPLEy LS MOJO 3 MOJO HD3 with 130mm Fork sIze MedIuM large sIze MedIuM large x-large sIze sMall MedIuM large x-large sIze sMall MedIuM large x-large seattube a 16.5” 18.5”...
  • Page 5 geoMetry / QuIcK sPecs geoMetry / QuIcK sPecs TRANNy 29 TRANS-FAT HAkkALüGI DISC 700cc sIze sMall MedIuM large x-large sIze MedIuM large x-large sIze seattube a 14.5” seattube a 17” seattube a 470mm 17” 19” 21” 19” 21” 500mm 530mm 550mm 580mm 610mm...

  • Page 6: Frame Sizing Guide

    FraMe sIzIng guIde FraMe sIzIng guIde Mountain Bike sizing guide CyCloCross Bike sizing guide FraMe sIze HeIgHt / In HeIgHt / cM FraMe sIze HeIgHt / In HeIgHt / cM small 5’0” – 5’5” 152 – 165 4’11” – 5’2” 150 –...
  • Page 7 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs & trIcKs neW rIPley / rIPley ls neW rIPley / rIPley ls Driveside Cable Routing Non-Driveside Cable Routing...
  • Page 8 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs neW rIPley / rIPley ls neW rIPley / rIPley ls 1x Cable Routing 2x Cable Routing...

  • Page 9: Bike Set-Up Tips And Tricks

    For uK/au/nz/za FolK various ports we have available for the and soMe Motorcycle rIders… New Ripley, Ripley LS, Mojo HD3, Mojo 3, your brake levers are most likely set up Tranny29, and Trans-Fat. opposite to the rest of the world i.e. front...
  • Page 10 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs Mojo Hd3 / Mojo 3 Mojo Hd3 / Mojo 3 Driveside Cable Routing Non-Driveside Cable Routing The Mojo HD3 and Mojo 3 uses our new versatile cable port system for cable routing. The most common set-up these days is a 1X drivetrain with an internally mounted dropper.
  • Page 11 WItH toP Pull deraIlleurs the illustrations. We have made the Mojo HD3 and Mojo 3 compatible with the new Shimano side swing front derailleurs. Should you be retrofitting an older style top pull derailleur refer to new Ripley Routing on page 14.
  • Page 12 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs Mojo Hd3 / Mojo 3 Mojo Hd3 / Mojo 3 Brake Cable Routing 1x Cable Routing 2X routing on the Mojo HD3 and Mojo 3 is the same as the Tranny29 as shown on page 25.
  • Page 13 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs tranny29 / trans-Fat tranny29 / trans-Fat Driveside Cable Routing Non-Driveside Cable Routing With the Tranny29, we pioneered our cable port system that you see on our current line up of bikes. The routing is also Since we ship the frames with both halves assembled, the person building the bike fairly straight forward, with one twist.
  • Page 14 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs tranny29 / trans-Fat tranny29 / trans-Fat sIngle sPeed caBle routIng 2x caBle routIng...
  • Page 15 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs tranny29 gearIng the slot machine bolt to 25 Nm. Next Mojo Hd3 / Mojo 3 cHaIn guIde The Tranny29 can be set-up 1X, 2X, 3X tighten the seat stay bolts to 10 Nm. If The Mojo HD3 and Mojo 3 framesets ship with a (remember that?) or as a single speed.
  • Page 16 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs WIde rIMs Plus tIres In 2014, we introduced our line of wide The Mojo 3 and now the Mojo HD3 note on Boost Mojo Hd3 / Mojo 3 carbon fiber rims and wheels. are compatible with the new breed BottoM BracKet InstallatIon of Plus tires, to 2.8”.
  • Page 17 BIKe set-uP tIPs and trIcKs BIKe set-uP tIPs and trIcKs iBis CarBon wheel speCs iBis aluMinuM wheel speCs rIMs & WHeelsets rIMs & WHeelsets Wheel size 27.5” 29” Wheel size 27.5” 27.5” 29” 29” 27.5” 29” 29” outer Width (mm)
  • Page 18 Should you need to touch up areas for holding your carbon seat post or The New Ripley, Ripley LS, Mojo HD3, general FraMe InForMatIon Cane Creek headsets. check clearance between the swingarm...

  • Page 19: Fork Set-Up

    If your fork has a high speed table on the next page. have 51mm offsets, so if you (or your compression damping control, this retailer) got the fork from Ibis, it’s got the Fox 34 OPEN CLOSED would usually be used to slow things right offset.
  • Page 20 ForK set-uP ForK set-uP Add recommended air for rider weight Slide o-ring until it rests Measure sag–the distance from (see charts on following pages). With on wiper, then dismount o-ring to wiper. Start with sag of sTep 1 sTep 2 sTep 3 bike on level ground, bounce up and without disturbing...

  • Page 21: Fork Air Pressure Charts

    ForK aIr Pressure cHarts : STARTING PRESSURES FOR SETTING SAG STARTING PRESSURES FOR SETTING : ForK aIr Pressure cHarts Many Ibis Fox Float 36 : 27.5* Fox Float 34 : 27.5* Fox Float 34 : 29* x-Fusion sweep : 27.5...

  • Page 22: Rear Shock Set-Up

    / rIPley ls sag Fox Float dPs hit the next bump resulting in “packing the positive and negative air chambers its travel 10-20 times. For a more detailed http://www.ridefox. Recommended beginning pressures can The Float DPS has totally new internals down”.
  • Page 23 rear sHocK set-uP rear sHocK set-uP uPdatIng tHe orIgInal we’ve provided boost and non boost part Mojo Hd3 / rc2 daMPer / 15MM Fox Float x2 Fox Float x2 Base settings rIPley susPensIon numbers for you. PIncH axle Fox fires yet another across the bow *Count Clicks from Closed: 0 Clicks = Closed* If you wish to update your first generation 910-20-083: 2017, 36, k, FLOAT, 27.5in,...

  • Page 24: Rear Shock Air Pressure Charts

    STARTING PRESSURES FOR SETTING SAG IMPortant note aBout Fox dPs evol sHocKs: Fox dps eVol (NEW RIPLEy / RIPLEy LS) x-Fusion MiCrolite rl (NEW RIPLEy / RIPLEy LS) We valve the shocks so that they give a very plush feeling at 25% and more sag is not needed to increase traction.

  • Page 25: Bearing Maintenance And Replacement

    For that, you will need the following tools: website, or you can have your dealer order them from Ibis for you. • 12mm open end wrench • 2 x 6mm Allen wrench Replacement is super simple and requires these common tools: •...
  • Page 26 FraMe HardWare NEW RIPLEy / RIPLEy LS : FraMe HardWare s in gl e st op d o ub l e p ort/ s to p m 4 x8 fl a t he ad bo l t e cce nt ri c c ap...

  • Page 27: Frame Hardware

    FraMe HardWare : MOJO HD3 MOJO 3 : FraMe HardWare single stop single stop single stop double port/stop double port/stop clevis shock bolt clevis shock nut forward shock mount bolt clevis cable guard clevis nut clevis shock bolt clevis outer reducer cable guard clevis mounting bolt clevis mounting bolt...
  • Page 28 FraMe HardWare : TRANNy29 TRANS-FAT : FraMe HardWare single cable port w/m4 x 8 flat head bolt single cable port w/m4 x 8 flat head bolt single cable stop w/m4 x 8 flat head bolt single cable stop w/m4 x 8 flat head bolt single cable port w/m4 x 8 flat head bolt single cable port w/m4 x 8 flat head bolt seatstay yolk nut...
  • Page 29 torQue sPecs MOJO HD3 : FraMe HardWare ripley Models Hexle rear axle HardWare torQue sPec. tHread treatMent There is not a numerical Clevis to Swingarm Bolts 8 nm Loctite 243 torque figure for the Hexle. Titanium Bolts: use Ti anti-seize on the shaft and Loctite 243 on the threads We recommend tightening the Eccentric Shaft Bolts 8 nm...
  • Page 30 rIPley : SWINGARM REMOVAL SWINGARM REMOVAL : rIPley This information is shown in a video: http://tinyurl.com/n8f9o4p steP 1 steP 2 steP 3 steP 4 Put your Ripley in a work stand. Remove the front Remove both of the eccentric core bolts Remove the countersunk bolt from each Gently remove the cap, and then you will be able to push the eccentric core out of...

  • Page 31: Swingarm Removal

    The chamfered hole on the Tool (drawing to the right) can be found cap aligns with the threaded hole on in the video above and on the Ibis website the eccentric core. Use blue loctite under Support>Technical Articles>Ripley on the bolt.
  • Page 32 sWIngarM reMoval : MOJO HD3 / MOJO 3 MOJO HD3 / MOJO 3 : sWIngarM reMoval steP 1 steP 2 steP 3 steP 4 steP 5 steP 6 Put your freshly cleaned Mojo in Carefully separate the shock and Remove the lower shock mount Remove front lower link shaft and Pull the swingarm with the Remove the axle in the lower link...

  • Page 33: Warranty/Registration

    Ibis Cycles. derailleur hangers. or frame component that it determines In no event shall Ibis Cycles be held serIal nuMBer to be defective. This warranty does not responsible for direct, incidental or...

  • Page 34: Chuck's Recipe

    IMPress your rIdIng BuddIes WItH toll Free (formerly called an 800 number but all 800’s are used up we guess) cHucK’s HoMeMade energy Bars 1–866–424–7635 (1–866–IBIS–635) IngredIents not toll Free (unless maybe you’re at work) keep at room temperature for up to 1 week 1–831–461–1435...
  • Page 35 alPHaBetIcal Index vIdeo Index aLphaBeTICaL INDex Airstream 2–3 Introduction Ripley: Replacing the Eccentric Link Bearings Bearing Specs, Mojo ISCG 05 http://tinyurl.com/n8f9o4p Bottle Cage Method Man Cable Routing 10-25 Peanut Butter Wrench Cannoli Rear Shock Air Pressure Chart 44-45 Ripley: Swingarm Removal Chuck’s Recipe Rear Shock Tuning 40-45...
  • Page 36 notes...

This manual is also suitable for:

Mojo 3Ripley ls

Table of Contents