Traxxas 57046-4 Owner's Manual page 12

ESC/Motor Wiring Diagram
12 • DCB M41 WIDEBODY
TQ RADIO & BRUSHLESS POWER SYSTEM
i
Your model is equipped with the newest Traxxas TQi transmitter
with Model Memory. The transmitter has two
Traxxas Link™
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.
TRANSMITTER AND RECEIVER
Set Button Throttle Neutral
Adjust
Red/Green Status LED
see page 29 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
**Accessory sensor expansion port for use with the Telemetry Expander Module
(see Traxxas.com for more information).
WIRING DIAGRAM
Traxxas High-Current
Connectors (Male)
to Batteries
Steering Wheel
Antenna
V/T - Voltage/Temp Sensor Port**
RPM - RPM Sensor Port**
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Steering Servo*
* Not used
Sensor Expansion
Port **
VXL-6s MARINE ELECTRONIC SPEED CONTROL
Traxxas High-Current
Connector (Male)
to Battery
LED
LED
Receiver Cable
(RX wire)
Brushless Motor
(see side bar for proper
motor wiring)
Receiver
Channel 1
Steering Servo
** Accessory sensor ports for use with standard voltage/temperature and RPM
telemetry sensors (see Traxxas.com and included materials for more information)
to Motor
Watercooling
Output
Channel 2
Electronic
Speed Control
Watercooling
Input