Advertisement

Available languages

Available languages

CERAMIC HEATER
INSTRUCTION MANUAL
Model: KPT/R 2000
READ AND SAVE THIS INSTRUCTION
Please read these instructions carefully and keep for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPT/R 2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kero-Sun KPT/R 2000

  • Page 1 CERAMIC HEATER INSTRUCTION MANUAL Model: KPT/R 2000 READ AND SAVE THIS INSTRUCTION Please read these instructions carefully and keep for future reference.
  • Page 2: Important Notes

    In order to prevent the risks of a fire, an electrical shock, burns and other injuries, It is imperative to observe basic safety measures when using electrical appliances. IMPORTANT NOTES 1.The specified voltage must match the mains voltage. Use an adequate wire cross- section.
  • Page 3: Supply Cable

    13.To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, moisture or any liquid other than those necessary for correct operation of the product. 14.This product should not be used in the immediate vicinity of water, such as bathtub, washbowls, bathroom swimming pool etc.
  • Page 4: Before Use

    BEFORE USE 1.Before use, remove all packaging and inspect the appliance for any damages. If there are appears to be any damages, please take it back to place of purchase for an inspection or replacement. 2.Ensure that all the accessories are included as per diagram above before you can continue with the installation.
  • Page 5: Timer Function

    Turn the heater ON by pressing the ON/OFF button The unit will display the current Room temperature. The unit is now in ‘’FAN” mode. This will conduct recirculation of the room air. 6.Upon pressing the ” “ , button the unit will be in the low heat mode. 7.Pressing the”...
  • Page 6: Safety System

    THERMOSTAT INSTRUCTIONS 1.Press the”+” or”-” button until the display shows “(A).” 2.To adjust temperature, press ‘’+” to increase the desired temperature and”-” to decrease the desired temperature. 3.When the air temperature reaches 3 degrees above the set temperature, the heater will cut off 4.When the air temperature drops 1 degree below the set temperature, the unit will come back on.
  • Page 7: Maintenance

    MAINTENANCE 1.Your appliance must be switch OFF via the main power supply and unplugged before proceeding with any cleaning work. 2.Clean the housing with a lightly damp cloth, a vacuum cleaner or a dusting brush. 3.Never use flammable or abrasive cleaning agents such as benzene or spirit to clean the appliance.
  • Page 9 : KPT/R2000...
  • Page 10 . 2. . 3. . 4. service (Siba 210 5386490, fax: 210 5313349) service ON/OFF.
  • Page 11 . . , ( . .
  • Page 12 service. OFF “0”. 220-240 . ON “1”.
  • Page 13 ON/OFF FAN. (FAN). ON/OFF ( FAN) 30-60. stand by.
  • Page 14 ‘’+” “-” “ ( )”. “+” “-” «AAA» ( «AAA» service.
  • Page 15 SERVICE...
  • Page 16 : KPT/R2000 122 42 : 568x185x195 xMxB) : 615x235x220 : 2,8 / 3,5...
  • Page 17 6,122 42 : 210 5386490 FAX: 210 5313349. SERVICE. 1999/44/EC 210 5386490...

Table of Contents