Introduction - MedeaWiz Sprite User Manual

MedeaWiz® Sprite
Team Kingsley LLC

Introduction

The MedeaWiz Sprite is a High Definition digital video repeater capable of HD 1080p HDMI
output. It has a direct trigger input and a 2-way communications serial port. The Sprite will loop
a video when power is applied, play a different video on a trigger or serial command, and then
go back to the looping video.
The Sprite has no black space when looping or changing files. It will hold the last frame of video
until the first frame displays.
In the trigger input mode, you can use a pushbutton, other dry contact, or voltage level change,
with your choice of a High or a Low transition trigger. You can also choose to allow an interrupt
from a new trigger event, or not to allow an interrupt.
In the Serial Control Mode you can have a looping video and control other videos to play on
command. Once the commanded video ends, the looping video will play again until a new
command is received.
The Sprite is one of the most energy efficient "green" video repeaters available today. Using
only 5 Volt DC power at an average of 400 mA, it takes only about 2 Watts to run.
2 | P a g e