Front Wheel Stand - BMW F 800 GS Rider's Manual

9
126
Insert the pulse sensor in
the bore hole and install the
screw 1.
z Adjusting chain sag (

Front wheel stand

Mount front wheel stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without an
additional auxiliary stand.
Component damage cause by
tipping over.
Place the motorcycle on an
auxiliary stand before lifting
the front wheel with the
BMW Motorrad front-wheel
stand.
Place motorcycle on a suitable
auxiliary stand.
with center stand
Place motorcycle on center
stand, ensuring that it is rest-
ing on a firm and level support
surface.
116).
Use basic stand with tool
number (83 30 0 402 241) in
combination with front-wheel
adapter (83 30 0 402 242).
OE
Loosen mounting bolts 1.
Push two mounts 2 outward,
continuing until front
suspension fits between them.
Adjust support pin to match
front suspension.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.