BMW F 800 GS Rider's Manual page 127

Roll rear wheel into swing arm
while guiding brake rotor be-
tween brake pads.
Roll rear wheel as far forward
as possible and lay chain 8 on
chain sprocket.
Mount left-hand adjusting
plate 7 in swing arm and install
quick-release axle 6 in brake
caliper and rear wheel.
Make sure that axle fits in
cutout of adjusting plate.
Insert right-hand adjusting
plate 5.
Install axle nut 2 but do not yet
tighten it down.
OE
without center stand
Remove auxiliary stand.
9
125
z